Panerai High Quality Luminor Due 3 Days Automatic Acciaio – 45mm PAM00674 Swiss Movement Replica

The new Luminor Due 3 Days Automatic is the first watch in the LUMINOR DUE collection with automatic winding and it contains one of the most sophisticated movements made by the Panerai Luminor Due 45mm Replica Manufacture in Neuchâtel, the P.4000 calibre with decentralised micro-rotor. Compared to the similar Luminor 1950 models already in the collection, the ingenious structure of this calibre and the work of the designers has enabled the thickness of the case to be reduced by about 40% (10.7 mm), while maintaining the solidity, strength and functionality of the watch and leaving its distinctive design unchanged.

Immediately recognisable by the iconic bridge device protecting the winding crown, the case is available in AISI 316L stainless steel. The design of the dial, with its sandwich structure, is minimalist, in perfect Panerai style: figures at the cardinal points, bar markers corresponding to the hours and an auxiliary small seconds dial at 9 o’clock.

The new Luminor Due 3 Days Automatic has the P.4000 calibre. the thinnest automatic calibre developed by the Panerai Manufacture. The most distinctive feature of this calibre is the decentralised micro-rotor which rotates in both directions, feeding energy into the two spring barrels which accumulate a power reserve of three days. The balance bridge is the type with twin supports, more secure and stronger than the single cantilever balance cock, and the watch also has the device which stops the balance wheel when the winding crown is pulled out, for synchronising the time perfectly.

The Luminor Due 3 Days Automatic is supplied with a black alligator strap.

It is water-resistant to 3 bar (about 30 metres).

Watch collections of this century.

Panerai High Quality Luminor Due 3 Days Automatic Acciaio - 45mm PAM00674 Swiss Movement Replica

Here is some pretty big news for Panerai: a new family of watches, the Luminor Due, has only been announced concurrently with the opening of the “Dive Into Time” exhibition of Panerai timepieces spanning the brand’s whole history, in Florence, Italy. The new family of watches signifies a significant slimming of the traditionally rather thick Luminor instance, and was designed to maintain the technical characteristics of Luminor (including the use of in-house calibers) while still alternatively, and further, Luminor design available. Notably, the set represents the creation by Panerai of a more design-centric set — at 3 bar/30 meter water resistance nowadays are not Luminor watches with which to dive, but instead, to be worn out more readily than the existing Luminor watches, and to emphasize the company’s uniqueness from a layout perspective.

Panerai Luminor Due Replica Watches
As you’ve guessed by now, this is where the Panerai Luminor Because 3 Days Automatic PAM674 enters the picture. The PAM674 is marketed on a black leather strap — the most boring strap in most of strap history and one which does little justice to the watch, even though it is, admittedly, a nice back-up if you want to wear it with formal apparel. So, after placing it on to ease my conscience, then I eliminated the black strap. Drilled lugs are valued and, in this example, work much better visually compared to large, screw-secured pins. The strap I installed is an aged, tan leather strap that really transformed the looks of the watch.

Technical Details

Movement Automatic mechanical, P.4000 calibre, executed entirely by Panerai Replica, 13¾ lignes, 3.95 mm thick, 31 jewels, Glucydur® balance, 28,800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 3 days, two barrels. 203 components. Off – centered oscillating weight

Functions Hours, Minutes, Small Seconds

Bezel
polished steel

Back See-through sapphire crystal

Dial Sun-brushed black with luminous Arabic numerals and hour markers. Small seconds at 9 o’clock.

Crystal sapphire crystal formed of corundum

Water Resistance 3 bar (~30 metres)

Strap Alligator, Black, Tone on tone, 24/22 MM Standard

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

Panerai Luminor Due 3 Days Acciaio Replica

Replica Movement

P.4000 calibre
Officine Panerai presents the P.4000 calibre, the first automatic movement with an off-centre micro-rotor completely developed and made in the Panerai Manufacture at Neuchâtel. This design means that the rotor is mounted off-centre and is therefore smaller in diameter than the calibre itself: a sophisticated technical solution enabling the thickness of the movement to be substantially reduced. The small oscillating weight is inserted within the movement rather than superimposed upon it and the result is a calibre which preserves all the Panerai characteristics of accuracy, reliability and solidity but with a thickness of only 3.95 mm.
With a diameter of 13¾ lignes (31 mm), the new calibre has a large bridge which is flanked by the small oscillating weight winding in both directions and the balance cock. The latter has twin supports, more secure and stronger than the customary overhanging balance cock with a single support. The supports have two screws for adjusting the vertical play of the balance staff. The balance wheel oscillates at 28,800 alternations per hour (equivalent to a frequency of 4 Hz). It is a balance wheel with variable inertia, that is, with screws enabling the rate to be adjusted precisely without altering the relationship of the balance spring and the bridge. Fitted with 31 jewels, the movement has a power reserve of at least three days, as a result of having two spring barrels connected in series. It is also fitted with the device which stops the balance wheel when the winding crown is pulled out, for synchronising the watch exactly.
The P.4000 calibre is produced in two versions which differ in the kind of finish, the engraving and the material of the micro-rotor. The first, for models with a steel case, has bridges with a horizontally brushed finish, blue engraving and an oscillating weight of tungsten alloy, with relief decoration on the matt surface. The second version is for the models with a gold case and it has bridges with a circular brushed finish, gilded engraving and a rotor of 22 carat gold, with clous de Paris hobnail finish and polished decorations in relief on the brushed surface.
Read More about this Panerai Replica Movement

Panerai Luminor Due Replica Watches

Replica

Panerai Luminor Due Review Best Replica Watches

P.4000 calibre
Officine Panerai presents the P.4000 calibre, the first automatic movement with an off-centre micro-rotor completely developed and made in the Panerai Manufacture at Neuchâtel. This design means that the rotor is mounted off-centre and is therefore smaller in diameter than the calibre itself: a sophisticated technical solution enabling the thickness of the movement to be substantially reduced. The small oscillating weight is inserted within the movement rather than superimposed upon it and the result is a calibre which preserves all the Panerai characteristics of accuracy, reliability and solidity but with a thickness of only 3.95 mm.
With a diameter of 13¾ lignes (31 mm), the new calibre has a large bridge which is flanked by the small oscillating weight winding in both directions and the balance cock. The latter has twin supports, more secure and stronger than the customary overhanging balance cock with a single support. The supports have two screws for adjusting the vertical play of the balance staff. The balance wheel oscillates at 28,800 alternations per hour (equivalent to a frequency of 4 Hz). It is a balance wheel with variable inertia, that is, with screws enabling the rate to be adjusted precisely without altering the relationship of the balance spring and the bridge. Fitted with 31 jewels, the movement has a power reserve of at least three days, as a result of having two spring barrels connected in series. It is also fitted with the device which stops the balance wheel when the winding crown is pulled out, for synchronising the watch exactly.
The P.4000 calibre is produced in two versions which differ in the kind of finish, the engraving and the material of the micro-rotor. The first, for models with a steel case, has bridges with a horizontally brushed finish, blue engraving and an oscillating weight of tungsten alloy, with relief decoration on the matt surface. The second version is for the models with a gold case and it has bridges with a circular brushed finish, gilded engraving and a rotor of 22 carat gold, with clous de Paris hobnail finish and polished decorations in relief on the brushed surface.
Read More about this Panerai Replica

Panerai Luminor Due Review Best Replica Watches

Functions
Hours, Minutes, Small Seconds

 

Movement
P.4000 calibre

 

Case
Luminor Due

 

Case diameter
45 mm

 

Dial color
Black

 



Previous Article
Next Article